"Helping you spin your way from a troubled mind to peace of mind" er Stephen Kundert's motto.
All Stephen's top whorl drop spindles are turned as a complete unit (whorl glued to shaft prior to turning)– thereby insuring the best balance possible. The whorl diameter starts out at 3-1/2” and ends up at about 3-3/8” after turning. The shafts are tapered with fancy turning at the bottom so these spindles could also be used as a low whorl. The shaft length on all spindles is 8-1/2” (below the whorl) about 10-1/2” overall (not including the hook). The hooks are fashioned from .43 gauge stainless steel wire. Once they are adjusted they hold the adjustment very well. Each spindle has a notch cut at about the three o’clock position for the fiber to pass through. All drop spindles have several coats of a polymerized oil finish and a final buff with carnuba wax. Only one coat of finish is placed on the shaft to ensure the shaft is not too slippery but still remains protected. All spindles range from .9 to 1.5 ounces.
JMJ håndteiner.
Allena Jackson fra Spindle and wheel lager nydelige håndteiner som er håndskåret, de andre hun lager er håndteiner med trinsen i sten eller eks. murano glass.
